McCulloch MC1136B 用户手册

02472

1-1/2"

00238

Your tractor is equipped with an ad just able brake system 
which is mounted on the right side of the transaxle.

If tractor requires more than fi ve (5) feet to stop at highest 
speed in high est gear on a level, dry concrete or paved 
surface, then brake must be checked and ad just ed.

TO CHECK BRAKE
•      Park tractor on a level, dry concrete or paved surface, 

depress clutch/brake pedal all the way down and en-
gage parking brake.

•      Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manually 
push the tractor forward. If the rear wheels rotate, the brake 
needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE
•      Depress clutch/brake pedal all the way down and en-

 gage parking brake.

•      Measure distance between brake operating arm and 

nut “A” on brake rod.

•      If distance is other than 1-1/2", loos en jam nut and turn 

nut “A” until dis tance becomes 1-1/2".  Re tight en jam 
nut against nut “A”.

•         Road test tractor for proper stopping distance as stated 

above.  Readjust if nec es sary.  If stopping distance is 
still greater than fi ve (5) feet in high est gear, further 
main te nance is nec es sary.  Replace brake pads or 
contact a qualifi ed service center.

The mower blade drive belt may be replaced without tools.  
Park the tractor on level surface.  Engage parking brake.  

BELT REMOVAL -
•      Remove  mower  from  tractor  (See  “TO  REMOVE 

MOW ER” in this section of manual).

•      Work belt off both mandrel pulleys and idler pulleys.
•      Pull belt away from mower. 

BELT INSTALLATION -
•      Work belt around both mandrel pulleys and idler pul-

leys.

•     Make sure belt is in all pulley grooves and in side all 

belt guides.

•      Install mower (See "To Install Mower" in this section of 

manual).