Ferris Industries 5900799 用户手册

Not for 

Reproduction

Regular Maintenance

 6.  Loosen the hose clamps that secure the hoses to 

the fuel filter.

 7.  Remove the hoses from the filter.
 8.  Install the new filter in the proper flow direction in 

the fuel line.

 9.  Secure with the hose clamps and wipe up any 

spilled fuel.

 10. Reopen the fuel tank shut off valves when 

complete.

To Drain the Water Separator:
Refer to engine owners manual for specific water 
separator service procedures.

Refer to the engine owner’s manual for specific air 
filter service procedures.

Refer to Figure 15 for dipstick and oil fill locations.  
Refer to the engine owners manual for specific 
engine oil check and fill procedures. Also refer to the 
engine owners manual for specific engine oil and filter 
change procedures

 1.  Warm engine by running for a few minutes.  

(Refer to the engine operator’s manual for oil & 
filter replacement instructions.)

 2.  Remove the dipstick (A, Figure 15) to vent the 

crankcase and allow the engine oil to drain easily.

 3.  Place a small pan under the oil drain cap (D) to 

catch the oil.  Using the appropriate tools, remove 
the oil drain cap and drain the engine oil.

 3.  After draining, replace the oil drain cap (see 

engine owners manual for torque specification) 
and wipe up any spilled oil.

 4.  Place an absorbent shop cloth under the engine 

oil filter (B).  Remove the engine oil filter and 
replace with a new one.

 5.  Remove the shop cloth and wipe up any spilled 

oil.

 6.  Add new oil through the engine oil fill (C).  See 

the engine operator’s manual for specific oil 
recommendations.