Ferris Industries 5900799 用户手册

Not for 

Reproduction

www.ferrisindustries.com

Regular Maintenance

BCIU1 battery.
Removing the Floor Pan to Access the Battery:

 1.  Tilt the left side of the floor pan (C, Figure 28) 

up so that the locking pins clear the holes in the 
frame. Slide the floor pan to the left until it stops.

 2.  Raise the floor pan straight up and remove from 

the machine.

 1.  Remove the two hair pins with lanyards (D) from 

the floor pan retention pins (E).

 2.  Raise the floor pan straight up and remove from 

the machine.

 1.  Remove the two hair pins with lanyards (D) from 

the floor pan retention pins (E).

 2.  Slide the floor pan towards the back of the 

machine and then lift up to remove from the 
machine.

Cleaning the Battery and Cables:
 1.  Disconnect the cables from the battery, negative 

(black) cable first (B).

 2.  Clean the battery terminals and cable ends with a 

wire brush until shiny.

 3.  Reinstall the battery and reattach the battery 

cables, positive (red) cable first (A).

 4.  Coat the cable ends and battery terminals with 

petroleum jelly or non-conducting grease. 

 1.  Insert the floor pan so that the right locking pins 

go into the holes in the right side of the frame. 
Push the floor pan to the right until it stops and 
then lower the floor pan into place.

 1.  Insert the floor pan onto the machine and install 

the two hair pins with lanyards (D) into the floor 
pan retention pins (E).

 1.  Position the floor pan so that the rubber bushings 

slide into the slots in the rear frame brace. Pull the 
floor pan forward and lower into place.

 2.  Install the two hair pins with lanyards into the floor 

pan retention pins.