Ferris Industries 5900799 用户手册

Not for 

Reproduction

Troubleshooting, Adjustment & Repair

The seat can be adjusted forward and back.

S/N: 2014582798 & Below: Move the seat 
adjustment lever (A, Figure 37) forward, position the 
seat as desired, and release the lever to lock the seat 
into position.

S/N: 2014582799 & Above: Move the seat 
adjustment lever (A) towards the left, position the seat 
as desired, and release the lever to lock the seat into 
position.

The control levers can be adjusted in three ways. The 
alignment of the control levers, the placement of the 
levers (how close the ends are to one another) and 
the height of the levers can be adjusted.  

To Adjust the Handle Alignment
Loosen the mount bolts (A, Figure 38) and pivot the 
lever(s) (C) to align with each other.

To Adjust the Handle Placement
Loosen the jam nuts and adjust the placement bolt 
(B, Figure 38) in or out to properly adjust the lever 
end spacing.

To Adjust the Handle Height
Remove the mounting hardware and reposition the 
handle either up or down from its original position.  
You will need to readjust the handle alignment as 
described above.

If the rider veers to the right or left when the ground 
speed control levers are in the maximum forward 
position, the top speed of each of these levers can 
be balanced by turning the adjustment bolt(s) (A, 
Figure 39).  Only adjust the speed of the wheel that is 
traveling faster.

To Reduce the Speed of the Faster Wheel
 1.  Loosen the securing nut.
 2.  Turn the top speed adjustment bolt COUNTER-

CLOCKWISE to reduce the speed.

 3.  Retighten the securing nut when adjustment is 

complete.