Husqvarna RZ46215 用户手册
28
OPERATION
9. When the engine starts, immediately release the
ignition key back to the run position. Push the
choke control in gradually when the engine has
started.
choke control in gradually when the engine has
started.
IMPORTANT INFORMATION
Do not run the starter for more than 5 seconds
each time. If the engine does not start, wait
approximately 10 seconds before retrying.
Do not run the starter for more than 5 seconds
each time. If the engine does not start, wait
approximately 10 seconds before retrying.
WARNING!
Engine exhaust and certain vehicle
components contain or emit chemicals
considered to cause cancer, birth defects
or other reproductive system damage.
The engine exhaust contains carbon
monoxide, which is a odorless, colorless,
poisonous gas. Do not use the machine
in enclosed spaces.
Engine exhaust and certain vehicle
components contain or emit chemicals
considered to cause cancer, birth defects
or other reproductive system damage.
The engine exhaust contains carbon
monoxide, which is a odorless, colorless,
poisonous gas. Do not use the machine
in enclosed spaces.
8050-780
Turn to the start position
8050-781
Return to run position
8. Press in and turn the ignition key to the start
position.
10. Set the engine speed with the throttle. Allow the
engine to run at a moderate speed, approximately
mid throttle, for 3-5 minutes before loading it too
heavily. USE FULL THROTTLE WHEN MOWING
mid throttle, for 3-5 minutes before loading it too
heavily. USE FULL THROTTLE WHEN MOWING
(no choke).
8058-149
Set the engine speed