Kenmore 3 用户手册

VERTICAL MOWER. DEPTH OF CUT ADJUSTMENT 
 
Depth of cut changes as the height adjuster wheel pivot, 
relative to the frame. Notches on the wheel height adjus- 
ter allow ‘indexing’, ensuring the height adjustment is 
equal at both ends of the Reel. 
Fig.22 
To adjust the depth of cut : 
Note the position of the notches on the height adjusters, 
they must be the same at both sides of the reel. 

•  Back-off both locknuts. 

•  Turn the height adjusters CW to increase, CCW to 

decrease, the depth of cut.  

•  The notches are spaced 3/8 inch apart to enable 

accurate adjustments. 

•  Tighten the locknuts. 

 
DRIVE BELT ADJUSTMENT 
 
Fig.23 
The Drive Belts are tensioned by adjustable arms, 
not telescopic as on the standard mowers. 
To adjust the belt tension : 

•  Back-off the locknut. 

•  Turn the adjusting nut (viewed from front)CW to 

increase, CCW to decrease, the belt tension. 

•  Tighten the locknut.  

•  Adjust to allow ½ inch deflection of the belt 

midway between the sheaves. 

                                                                                       
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
Fig.22 
 
 
 
 
 
 
 
 
 
 
 
Fig.23 
 
 
                                                                                        26