Husqvarna 966614401 用户手册
OPERATION
27
Before Starting
1. Read the sections on Safety and Controls before
starting the machine.
2. Perform the daily maintenance before starting
(see Maintenance Schedule in the Maintenance
section).
3. Check that there is sufficient fuel in the fuel tank.
4. Make sure that the parking brake is engaged.
4. Make sure that the parking brake is engaged.
Roll Bar and Safety Belt
Operate the unit with the roll bar in the raised and
locked position and use the seat belt. There is no
rollover protection when the roll bar is down. If it is
necessary to lower roll bar, do not wear the seat belt.
Raise the roll bar as soon as clearance permits.
locked position and use the seat belt. There is no
rollover protection when the roll bar is down. If it is
necessary to lower roll bar, do not wear the seat belt.
Raise the roll bar as soon as clearance permits.
8065-011
Roll bar in upright position
WARNING!
The seat belt must be used when the
roll bar is in upright position.
The seat belt must be used when the
roll bar is in upright position.
8065-006
Activate parking brake before starting
8065-018
Place controls in neutral position
5. Adjust the seat to the desired position.
6. Place the steering controls in the neutral position.
6. Place the steering controls in the neutral position.