Husqvarna 966582201 用户手册
MAINTENANCE
39
Adjusting the Mower Deck
WARNING!
Before performing any service or adjustment checklist:
1. Engage the parking brake.
2. Place the Blade switch in the disengaged position.
3. Turn ignition switch to OFF position and remove the key.
4. Make sure the blades and all moving parts have completely stopped.
5. Disconnect the spark plug wire from all spark plugs and place the wire where it cannot
2. Place the Blade switch in the disengaged position.
3. Turn ignition switch to OFF position and remove the key.
4. Make sure the blades and all moving parts have completely stopped.
5. Disconnect the spark plug wire from all spark plugs and place the wire where it cannot
come in contact with the plug.
WARNING!
Blades are sharp. Protect your hands
with gloves and/or wrap blades with a
heavy cloth when handling.
with gloves and/or wrap blades with a
heavy cloth when handling.
IMPORTANT INFORMATION
This will place the mower deck in a standard
measurement position. Depending on the
type of grass being mowed or environmental
conditions, additional adjustments may be
required to achieve the desired cut.
measurement position. Depending on the
type of grass being mowed or environmental
conditions, additional adjustments may be
required to achieve the desired cut.
8050-015
Side to side adjuster nut
Check the tire pressure before adjustment of the
mower deck. See Checking Tire Pressure in
Maintenance. Faulty mower deck adjustments will
mower deck. See Checking Tire Pressure in
Maintenance. Faulty mower deck adjustments will
cause an uneven mowing result.
Leveling Deck
1. Position the mower on a level, preferably
1. Position the mower on a level, preferably
concrete, surface.
2. Check the pressure in all four tires. See Technical
Data section.
3. Rotate blade to align side to side.
4. Measure from the blade tips to the floor and
4. Measure from the blade tips to the floor and
compare the results.
5. Turn adjuster nut(s) to level deck if needed.
8058-155
Side to side blade alignment