Husqvarna 966947008 用户手册

oPERATIoN

Husqvarna-23

8062-004

Depress one operator presence lever and move the 

speed control to the desired speed. Pull the blade 

engagement control upwards. Set the desired rpm with 

the throttle. The best cutting and bagging is obtained 

with engine at top rpm.
While on level terrain, squeeze both drive levers 

slightly. Using thumbs, slide each neutral lock out the 

locked position. Slowly release both drive levers at the 

same time to begin forward motion.
The steering system of this mower uses individual right 

and left drive levers on the handle bars. Squeezing 

either lever will reduce the speed to that wheel. 

With the opposite wheel still under power, a turn is 

accomplished.  

If the drive lever is squeezed even tighter the wheel 

will go into reverse and a tighter more abrupt turn is 

accomplished. Turn left by squeezing the left hand 

lever or turn right by squeezing the right hand lever. 

The mower moves to the reverse gear when both drive 

levers are pulled fully upward to the handles.

operating on slopes can be hazardous. Read the 

Safety Instructions section “Driving on Slopes”.

The slowest speed possible should be used when 

• 

mowing on slopes.
Avoid stopping or changing speed on hills.

• 

make all turns slowly.

• 

If the mower is not tracking straight, check the 

air pressure in both rear tires. Recommended air 

pressure is 15 psi (1 bar). Tracking should be checked 

on a flat, level surface.
Turning the tracking knob clockwise will adjust the 

mower to the left. Turning the knob counter-clockwise 

adjusts the mower to the right.

8062-027