Husqvarna 966503401 用户手册
38
mAINTENANCE
Parking Brake
Visually check that no damage is found on the lever,
linkages, or switch belonging to the parking brake.
Perform a standstill test and check that there is
sufficient braking action.
To adjust the parking brake, contact the Husqvarna
service workshop.
linkages, or switch belonging to the parking brake.
Perform a standstill test and check that there is
sufficient braking action.
To adjust the parking brake, contact the Husqvarna
service workshop.
IMPORTANT INFORMATION
The machine must be absolutely standing still
when applying the parking brake.
when applying the parking brake.
8058-095
Parking brake
WARNING!
Faulty adjustment will result in
reduced braking ability and can
cause an accident.
reduced braking ability and can
cause an accident.
Pump Belt
Replacing EZT (E-Series Zeroturn Transaxle) belt
Park the mower on a level surface. Engage the
parking brake.
Park the mower on a level surface. Engage the
parking brake.
EZT Belt Removal
NoTE: To maintain efficient cooling and not damage
the EZTs, be careful of the fan blades when servicing
the belt.
NoTE: To maintain efficient cooling and not damage
the EZTs, be careful of the fan blades when servicing
the belt.
Remove the deck belt (see
•
Deck Belt
Removal in this section of the manual).
Create slack in the belt by removing the
Create slack in the belt by removing the
•
spring on the pump idler arm.
The belt should now be able to be removed
The belt should now be able to be removed
•
from the engine pulley and EZT pulleys.
EZT Belt Installation
Wrap the EZT belt around the EZT pulleys
•
Route the belt around the inside of the idler
•
pulley.
Wrap the belt around the engine pulley.
Wrap the belt around the engine pulley.
•
Reattach the spring on the pump idler arm.
•
Install clutch onto engine shaft (pulley side
•
down), making sure key is installed. Align
the clutch anti-rotation tab into slot on clutch.
Secure clutch, install wire.
Reinstall the deck belt onto the electric
the clutch anti-rotation tab into slot on clutch.
Secure clutch, install wire.
Reinstall the deck belt onto the electric
•
clutch (see Deck Belt Removal in this
section of the manual).
section of the manual).