Husqvarna GTH2654T 用户手册

•      ATTACH REAR LIFT LINKS (C) - Insert rod end of lift 

link assembly into hole in tractor lift shaft suspension 
arm (L) and pivot link down to mower. Lift rear corner 
of mower and position slot in link assembly over pin on 
rear mower bracket (D) and secure with washer and 
retainer spring.

•      Repeat on opposite side of tractor.

•      ATTACH MOWER SIDE SUSPENSION ARMS (A) TO 

CHASSIS - Position hole in arm over pin (B) on outside 
of tractor chassis and secure with washer and retainer 
spring.

•      Repeat on opposite side of tractor.

•     Turn steering wheel to position wheels straight for-

ward.

•     ATTACH FRONT LINK (E) - Work from left side of 

tractor. Insert rod end of link assembly through front 
hole in tractor front suspension bracket (F) and secure 
with7/16 retainer spring (G) through hole in link located 
behind the bracket.

•     Insert other end of link (E) into hole in front mower 

bracket (H) and secure with washer and 5/16 retainer 
spring (J).

•     Disengage belt tension rod (K) from locking bracket 

(L).

•      Install belt onto engine clutch pulley (M).

IMPORTANT:  Check belt for proper routing in all mower 
pulley grooves.