Husqvarna 230 ACX 用户手册

14 - English

The STOP button on the top of Automower is mainly 
used to stop the mower when it’s running. When the 
STOP button is pressed a cover opens, behind which 
there is a control panel. The STOP button remains 
depressed until the cover is closed again. This acts 
as start inhibitor.

The control panel on the top of Automower is where 
you manage all the mower settings. The main switch 
is also located on the control panel. Open the control 
panel cover by pressing down the STOP button.

When the main switch is turned ON for the first time, a 
start-up sequence begins which includes: selection of 
the language, time format, date format and four digit 
PIN code, plus setting of the time and date, see 
page 32.

The selected PIN code must then be entered each 
time the main switch is moved to the ON position. 
This theft-prevention function is called Time lock 
(4-1-2) and Automower has this function activated as a 
default setting. The function also means that the 
mower stops mowing after a set number of days and 
will not continue until the correct PIN code has been 
entered. The function can be deactivated or changed 
as required. For more information about Time lock 
(4-1-2), see page 58.

The Automower can enter a sleep mode to save 
power. The display on the control panel is then 
completely dimmed.

The sleep mode is activated 25 minutes after the 
STOP button has been pressed and then not reset to 
the operating mode. Automower is then activated by 
switching the main switch off and on.

The sleep mode can also be activated in the event of 
a fault occurring during mowing or charging and 
which is not rectified within 25 minutes. Automower is 
then activated by pressing the STOP button.

 3012-388

 3012-700

 3012-400