Husqvarna 230 ACX 用户手册

10 - English

This chapter contains information you should be aware 
of when planning the installation.

An installation of Husqvarna Automower™ includes 
four main components:

Automower, an automatic lawn mower that mows the 
lawn by moving in essentially an irregular pattern. 
The mower is powered by a maintenance-free 
battery.

Charging station, where your Automower returns 
when the charge level in the battery becomes too low.

The charging station has three functions:

•

To send control signals along the boundary wire.

•

To send out signals so Automower finds the 
charging station.

•

To charge Automower battery.

Transformer, which is connected between the 
charging station and a 230V wall socket. The 
transformer is connected to the wall socket via an 
integrated power cord and to the charging station via 
a 20 m long low voltage cable. The low voltage cable 
must not be extended.

Wire, laid in a loop around Automower’s working 
area. The boundary wire is laid around the edges of 
the lawn and around objects and plants that the 
mower must not run into. The wire is also used for 
any guide wires.

The wire supplied with the installation is 400 m long 
(250 m for 220 AC). If this is not sufficient more wire 
can be purchased, with a connector, and spliced onto 
the existing wire.

3012-691

3012-509

3012-220

3012-221