Husqvarna 532424695 用户手册

下载
页码 21
13
MOWING 
POSITION
MOWING 
POSITION
HIGH POSITION
LOW POSITION
HANDLE 
BRACKET
HAIRPIN 
COTTER
MOUNTING 
PIN
FIG. 16
ENGINE
ENGINE SPEED
Your engine speed has been factory set.  Do not attempt 
to increase engine speed or it may  result in personal 
injury.  If you believe that the engine is running too fast or 
too slow, take your lawn mower to an authorized service 
center for repair and adjustment.
CARBURETOR
Your carburetor is not adjustable.  If your engine does not 
operate properly due to suspected carburetor problems, 
take your lawn mower to an authorized service center for 
repair and/or adjustment.
IMPORTANT:  NEVER TAMPER WITH THE ENGINE GOVERNOR, 
WHICH IS FACTORY SET FOR PROPER ENGINE SPEED.  
OVER SPEED ING THE ENGINE ABOVE THE FACTORY HIGH 
SPEED SETTING CAN BE DANGEROUS.  IF YOU THINK THE 
ENGINE-GOVERNED HIGH SPEED NEEDS ADJUSTING, 
CONTACT YOUR NEAREST AUTHORIZED SER VICE CEN TER, 
WHICH HAS PROPER EQUIP MENT AND EXPERIENCE TO MAKE 
ANY NEC ES SARY ADJUSTMENTS. 
LOWER 
HANDLE
ROTATE
FIG. 17
SERVICE AND ADJUSTMENTS
STORAGE
Immediately prepare your lawn mower for storage at the 
end of the season or if the unit will not be used for 30 
days or more. 
LAWN MOWER
When lawn mower is to be stored for a period of time, clean 
it thoroughly, remove all dirt, grease, leaves, etc.  Store in 
a clean, dry area.
1.  Clean entire lawn mower (See “CLEANING” in the 
Maintenance section of this manual).
2.  Lubricate as shown in Maintenance section of this 
manual.
3.  Be sure that all nuts, bolts, screws, and pins are se-
curely fastened.  Inspect   moving parts for damage, 
breakage and wear.  Replace if necessary.
4.  Touch up all rusted or chipped paint surfaces; sand 
lightly before painting.