Husqvarna 210 C 用户手册

 

16 - English

 

This chapter describes how you install Husqvarna 
Automower™. Before starting the installation read the 
previous chapter 

 

.

Read the whole of this chapter too before starting the 
installation. How the installation is made also affects 
how well Automower will work. It is therefore important 
to plan the installation carefully.

Planning is simplified if you make a sketch of the 
working area, including all obstacles. This makes it 
easier to see how the boundary wire should ideally be 
placed. Draw how the boundary wire is to be routed on 
the sketch. 

 

3.1 Preparations.

3.2 Installation of the loop generator/charger

3.3 Charging the battery.

3.4 Installation of the boundary wire.

3.5 Connecting the boundary wire.

3.6 Checking the installation.

3.7 Linking Automower™ to the loop generator/charger

In order to carry out a complete start-up of Automower 
the loop generator/charger and boundary wire must be 
connected and the mower linked to the loop 
generator/charger. If you would like to start the mower 
without having completed the full boundary installation, 
you can connect a temporary short loop around the 
mower.