Husqvarna 2003-06 用户手册

 

English-

 

19

 

Remember the following with regard to the working 
area boundaries:

•

If a high obstacle, for example a wall or fence, bor-
ders the working area, the boundary wire should be 
laid 35 cm from the obstacle. This will prevent the 
Auto Mower from colliding with the obstacle and 
reduce body wear.

•

If the working area borders against, for example, 
pools of water the boundary wire should be supple-
mented with a fence or the like. The height must 
then be at least 10 cm. This will prevent the Auto 
Mower, under any circumstances, coming outside 
of the working area.

•

If the working area borders against a small ditch, for 
example, a flower bed or a small elevation, e.g. a 
low verge (3-5 cm), the boundary wire should be 
laid 30 cm inside the working area. This prevents 
the wheels from driving into the ditch or up onto the 
verge.

•

If the working area borders against a flat path or the 
like that lies level with the lawn, is it possible to 
allow the Auto Mower to run a little over the path. 
The boundary wire should then be laid 10 cm from 
the edge of the path.

3012-229

3012-228

3012-230