Husqvarna 2003-06 用户手册

 

English-

 

9

 

Congratulations on your choice of an exceptionally 
high quality product.

To get the best from your Auto Mower requires knowl-
edge of its function. This chapter contains information 
you should be aware of when planning the installation.

Installation of the Husqvarna Auto Mower includes four 
main components:

 

, an automatic lawn mower that mows the 

lawn by moving in essentially an irregular pattern. The 
mower is powered by a maintenance free battery

 

, where your Auto Mower returns 

when the charge level in the battery becomes too low.

The charging station has three functions:

•

To send control signals along the boundary wire.

•

To send out signals so the Auto Mower finds the 
charging station.

•

To charge the Auto Mower battery.

 

, which is connected between the charg-

ing station and a 230 V wall socket. The transformer is 
connected to the wall socket via an integrated power 
cord and to the charging station via a 20 m long low 
voltage cable. The length of the low voltage cable must 
not be changed.

 

, laid in a loop around the Auto Mower’s 

working area. The wire is laid around the edges of the 
lawn and around objects and plants that the mower 
must not run into.

The length of boundary wire needed in an installation 
is the circumference of the working area plus a few 
extra metres to lay around ”islands”, objects and 
plants. A few extra metres are also required for any 
subsequent adjustments. The boundary wire supplied 
for the installation is 250 m long. If this is not sufficient 
more wire can be purchased, with a connector, and 
spliced onto the existing wire.

3012-278

3012-216

3012-220

3012-221