Husqvarna 532 43 13-45 用户手册

5.  Lift the round door of the discharge chute and place 

the grass catcher into place on the discharge chute.

NOTE: Be sure the grass catcher is securely locked in 
place and the round door of the discharge chute rests on 
the grass catcher as shown.

• 

Mower is now ready for rear bagging operation.

• 

To convert to mulching operation, remove grass catch er 
and discharge chute.  Secure mulcher door to mower 
housing with knob.

• 

To convert to side dis charg ing operation, remove grass 
catch er and discharge chute.  Install side discharge 
defl ector and secure it to lawn mower housing with 
knob.

The front wheels can be “locked” into position or set to 
“freewheel” for better maneuverability.  Placing the lockbars 
in the outer holes of the adjustment brackets “locks” the 
front wheels.  Likewise, placing the lockbars in the inner 
holes of the adjustment brackets allows the front wheels 
to spin freely (“freewheel”).

• 

Lift lockbar until the frontmost end clears the adjust-
ment bracket, then pivot lockbar to desired position.

IMPORTANT: Front wheels must be “locked” into position 
when operating on a slope.  Mow across the face of slopes: 
never up and down.

Your lawn mower was shipped ready to be used as a mulcher.  
To convert to rear bagging or side discharging:

REAR BAGGING

1.  Remove knob securing mulcher door to lawn mower 

housing.

3.  Secure rear of discharge chute to lawn mower housing 

with knob.

4.  Place rear handle of grass catcher on the crossbar of 

the lawn mower's lower handle as shown.

2.  Open mulcher door and insert tabs of discharge chute 

into hinge bracket opening and position rear of chute 
over threaded stud.

SIDE DISCHARGING

1.  Grass catcher and discharge chute must be re-

moved.

2.  Open mulcher door and install front of side dis charge 

defl ector beneath it as shown.

3.  Secure rear of side discharge defl ector to lawn mower 

housing with knob.

• 

Mower is now ready for side discharging operation.

• 

To convert to mulching operation, side dis charge de-
fl ector must be removed and mulcher door secured to 
mower housing with knob.

• 

To convert to rear bagging operation, side discharge 
defl ector must be removed; discharge chute and grass 
catcher installed and discharge chute secured to mower 
housing with knob.