Husqvarna 532 44 02-80 用户手册

下载
页码 48
6
NOTE: You may now roll your tractor off the skid. Follow the 
instructions below to remove the tractor from the skid.
  WARNING: Before start ing, read, un der stand and fol low 
all in struc tions in the Op er a tion section of this man u al. Be 
sure tractor is in a well-ventilated area. Be sure the area in  
front of tractor is clear of other peo ple and objects.
TO ROLL TRACTOR OFF SKID  (See Op er a tion 
section for location and function of con trols)
•  Raise attachment lift lever to its highest po si tion.
• 
Release parking brake by de press ing clutch/brake ped al.
•  Place freewheel control in "trans mis sion dis en gaged" 
position (See “TO TRANS PORT” in the Op er a tion 
section of this manual).
•  Roll tractor forward off skid.
Continue with the instructions that follow.
Fig. 2
ASSEMBLY
A
ADJUST SEAT (See Fig. 2)
•  Sit in seat.
• 
Lift up adjustment lever (A) and slide seat until a com-
fortable position is reached which allows you to press 
clutch/brake pedal all the way down.
•  Release lever to lock seat in position.
TO INSTALL MOWER AND DRIVE BELT 
(See Figs. 3 - 14)
1. SET PARKING BRAKE LEVER AND LOWER AT-
TACHMENT LIFT (See Fig. 3)
•  Depress clutch/brake pedal all the way down and hold.
•  Pull parking brake lever up and hold, re lease pres sure 
from clutch/brake pedal, then release parking brake 
lever.  Pedal should re main in brake position.  Ensure 
parking brake will hold tractor secure.
PARKING 
BRAKE 
LEVER
Fig. 3
•  The attachment lift switch is used to raise and lower 
the mower deck or other attachments mounted to your 
tractor. Ignition must be on to operate this switch.
•  Lower attachment lift to its lowest position.