Husqvarna GTH26K54T 用户手册

See MOWER AND DRIVE BELT ASSEMBLY Supplement 
Sheet for additional guidance on this assembly.

Be sure tractor is on level surface and engage park ing 
brake.
•      Lower attachment lift lever to it's lowest position.

CAUTION: Lift lever is spring loaded. Have 
a tight grip on lift lever, lower it slowly and 
engage in lowest position.

•      Turn steering wheel to the left as far as it will go and 

position mower on right side of tractor with defl ector 
shield to the right.

•     Remove plastic tie securing belt, bring belt forward 

and check belt for proper routing in all mower pulley 
grooves.

-  Pivot bar towards you and insert other end of bar 

into hole in rear mower bracket (D). Move mower as 
needed to insert bar.

-  Secure with washer and retainer spring as shown 

using small 5/16 retainer spring.

NOTE: Be sure mower side suspension arms (A) are point-
ing forward before sliding mower under tractor.
•     Slide mower under tractor until it is centered under 

tractor. 

•      FIRST INSTALL ANTI-SWAY BAR (S). 

-  From right side of mower, insert anti-sway bar into  

hole in transmission bracket (T).

02965

02995

02996

•     Using shoulder bolt, washer and locknut from parts 

bag, as sem ble front wheel to mower as shown. Tighten 
securely.