Husqvarna 532 43 95-58 用户手册

下载
页码 44
9
OPERATION
The operation of any tractor can result in foreign objects thrown into the eyes, which can result 
in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor 
or per form ing any ad just ments or repairs. We rec om mend standard safety glasses or a wide 
vision safety mask worn over spectacles.
TO USE THROTTLE CONTROL (D) (See Fig. 6)
Always operate engine at full speed (fast).
• 
Operating engine at less than full speed (fast) reduces 
engines operating efficiency.
•  Full speed (fast) of fers the best bagging and mower 
per for mance.
HOW TO USE YOUR TRAC TOR
TO SET PARKING BRAKE (See Fig. 4)
Your tractor is equipped with an operator presence sens-
 ing switch. When engine is running, any attempt by the 
op er a tor to leave the seat without first setting the parking 
brake will shut off the engine.
•  Depress brake pedal (B) all the way down and hold.
• 
Pull parking brake lever (C) up and hold, re lease pres-
 sure from brake pedal (B), then release parking brake 
lever. Pedal should re main in brake position. Make sure 
parking brake will hold tractor secure.
STOPPING (See Fig. 5)
MOWER BLADES -
•  To stop mower blades,move attachment clutch lever  
to “DIS EN GAGED” po si tion.
ENGINE - 
• 
Move throttle control between half and full speed (fast) 
position.
NOTE: Failure to move throttle control between half and full 
speed (fast) position, before stop ping may cause engine 
to “backfire”.
• 
Turn ignition key (F) to “
STOP
” position and remove key. 
Always remove key when leaving tractor to prevent 
un author ized use.
IMPORTANT:  LEAVING THE IGNITION SWITCH IN ANY 
POSITION OTHER THAN "STOP" WILL CAUSE THE BATTERY 
TO BE DIS CHARGED, (DEAD).
NOTE: Under certain conditions when tractor is standing 
idle with the engine running, hot en gine exhaust gases may 
cause “browning” of grass. To eliminate this possibility, al-
 ways stop engine when stopping tractor on grass areas.
CAUTION: Always stop tractor com-
 plete ly, as described above, before leav-
 ing the operator's position; to empty 
grass catcher, etc.
FIG. 4
FIG. 6
B
C
( ) 
ATTACHMENT 
CLUTCH SWITCH  
“ENGAGED”
( 
) ATTACHMENT 
CLUTCH SWITCH 
“DIS EN GAGED”
D
F
GROUND DRIVE -
•  To stop ground drive, depress brake pedal into full 
“BRAKE” position.
IMPORTANT: FORWARD AND REVERSE DRIVE 
PEDALS RETURN TO NEUTRAL POSITION WHEN NOT 
DEPRESSED.
FIG. 5