Husqvarna BZ6127D 用户手册
41
LUBRICATION
3. Engine Oil
Changing the Engine Oil
Change the engine oil and filter for the first
time after 50 hours of operation. Thereafter,
the oil should be changed every 150 hours
and the filter every other oil change.
time after 50 hours of operation. Thereafter,
the oil should be changed every 150 hours
and the filter every other oil change.
1.
Place the machine on a flat surface.
2.
Place a container under the engine.
Choose which drain plug is the lowest.
Choose which drain plug is the lowest.
3.
Remove the dipstick and open the drain
plug.
plug.
4.
Allow the oil to run out into the container.
5.
Then close the oil drain plug.
6.
Replace the oil filter if necessary.
7.
Fill with new engine oil in accordance
with Checking the Oil Level.
with Checking the Oil Level.
Checking the Oil Level
Check the oil level in the engine when the
machine is standing horizontally and the
engine is stopped.
machine is standing horizontally and the
engine is stopped.
Remove the dipstick, wipe it clean, and then
replace it.
replace it.
Take the dipstick out again and read the oil
level.
level.
WARNING!
Engine oil can be very hot if it is
drained directly after stopping
the engine. Allow the engine to
cool.
Engine oil can be very hot if it is
drained directly after stopping
the engine. Allow the engine to
cool.
IMPORTANT INFORMATION
Used engine oil is a health hazard and
must not be disposed of on the ground or
in nature; it should always be disposed
of at a service center or appropriate
disposal location.
Avoid skin contact; wash with soap and
water in case of spills.
Used engine oil is a health hazard and
must not be disposed of on the ground or
in nature; it should always be disposed
of at a service center or appropriate
disposal location.
Avoid skin contact; wash with soap and
water in case of spills.
Oil drain plug
BAM-22
Remove the dipstick
BAM-23