Husqvarna 970 用户手册
English –
15
E
DRIVING
STOP
START
STOP
START
1
2
3
1
2
3
Cold engine:
4. Push the throttle control to position 3 (choke
4. Push the throttle control to position 3 (choke
position). In this position the engine receives a
richer mixture so that the engine starts more
easily.
richer mixture so that the engine starts more
easily.
7. When the engine has started release the igni-
tion key to neutral position.
Push the throttle control to the required speed.
For cutting 3/4 to full throttle.
For cutting 3/4 to full throttle.
Warm engine:
5. Set the throttle control midway between position
5. Set the throttle control midway between position
1 and 2.
6. Turn the ignition key to start position.
IMPORTANT INFORMATION
Do not run the starter for more than about
5 seconds at a time. If the engine does not
start, wait about 10 seconds before trying
again.
5 seconds at a time. If the engine does not
start, wait about 10 seconds before trying
again.
!
WARNING!
Never run the engine indoors, in
enclosed or poorly ventilated areas.
The exhaust fumes contain toxic
carbon monoxide.
enclosed or poorly ventilated areas.
The exhaust fumes contain toxic
carbon monoxide.
850,970 Eng
97-10-14, 14.29
15