Husqvarna Auto Mower 用户手册

 

English-

 

11

 

The STOP button on the top of Auto Mower is mainly 
used to stop the mower when it’s running. When the 
STOP button is pressed a cover opens, behind which 
there is a control panel. The STOP button remains 
depressed until the cover is closed again. This acts as 
start inhibitor.

The control panel on the top of the Auto Mower is 
where you manage all the mower settings. The main 
switch is also located on the control panel. Open the 
control panel cover by pressing down the STOP button.

When the main switch is turned ON for the first time, a 
start-up sequence begins which includes: selection of 
the language, time format, date format and the four 
digit PIN code as well as the setting of the time and 
date, see page 25.

The Auto Mower can enter a sleep mode to save 
power. The display on the control panel is then com-
pletely dimmed.

The sleep mode is activated 25 minutes after the 
STOP button has been pressed and then not reset to 
the operating mode. Auto Mower is then activated by 
switching the main switch off and on.

The sleep mode can also be activated in the event of a 
fault occurring during mowing or charging and which is 
not rectified within 25 minutes. The Auto Mower is then 
activated by pressing the STOP button.

 3012-247

 3012-283

 3012-297