Husqvarna CD61L 用户手册

English

-

20

MAINTENANCE

Regular cleaning and washing, especially under the 
mower deck, will increase the machine’s life-span. 
Make it a habit to clean the machine directly after use 
(after it is cooled), before the dirt sticks.

Do not spray water on the top of the mower deck. Use 
compressed air to clean the top side of mower deck. 
Regularly clean deck and underside of the deck with 
normal water pressure. Do not use a high pressure 
washer or steam cleaner. Avoid spraying engine and 
electrical components with water.

Do not rinse hot surfaces with cold water. Let unit cool 
before washing.

8050-092

Anti-scalp rollers are properly adjusted when they are 
just slightly off of the ground when the deck is at the 
desired cutting height in the operating position. Anti-
scalp rollers then keep the deck in the proper position 
to help prevent scalping in most terrain conditions.

The anti-scalp rollers can be set in three positions:

Upper position 1½" to 3" / 38 to 76 mm grass.

• 

Middle position 3" to 4½" / 76 to 114 mm grass.

• 

Lower position 4½" to 6" /114 to 152 mm grass.

• 

Upper position 3" to 4½" (76 to 114mm) grass.

• 

Lower position 4½" to 6" (114 to 152mm) grass.

• 

The rollers should be approximately ¼" /6.5 mm from 
ground. Do not adjust the rollers to support the deck.