Husqvarna YTH23V42LS 用户手册

•  Install belt onto electric clutch pulley (M).

•  ATTACH REAR LIFT LINKS (C) - Lift rear corner of 

mower and position slot in link assembly over pin on 

rear mower bracket (D) and secure with washer and 

retainer spring.

•  Repeat on opposite side of tractor.

• 

ATTACH FRONT LINK (E) - Work from left side of trac-

tor. Insert threaded rod end of link assembly through 

front hole in tractor suspension bracket (F).

•  Install bushing (O) and loosely install nut (P) and jam 

nut (Q).

•  Insert flared ends of link (E) into slots in front mower 

bracket (H).

IMPORTANT:  CHECK BELT FOR PROPER ROUTING 

IN ALL MOWER PULLEY GROOVES.
•  Raise attachment lift lever to highest position.
•  If necessary, adjust gauge wheels before op er at ing 

mower as shown in the Operation section of this manual.

See Mower Drive Belt Installation in "TO REPLACE MOWER 

BLADE DRIVE BELT" in this section of the manual.  

•  Check Front-To-Back Adjustment in "TO LEVEL 

MOWER" in this section.