Husqvarna P 525D 用户手册

English

 – 19

1

Release the parking brake before driving

2

Carefully press down one of the pedals until the required 
speed is obtained. Pedal (1) is used to drive forwards, and 
pedal (2) to drive backwards.

3

Lower the cutting unit by directly moving the lever forward 
to the float position where the lever stays put.

4

Start the cutting unit if necessary by pulling up the switch 
for the cutting unit.

Release the drive pedals. The machine slows and is stopped 
by the drive system. Do not use the parking brake as the drive 
brake.

Quicker braking is possible if you press down the drive pedal 
for the opposite direction.

Preferably allow the engine to idle for a minute to obtain 
normal working temperature before stopping it if it has been 
working hard.

Turn off the cutting unit using the PTO button.

1

Apply the parking brake by moving the handle downward.

2

Lift the cutting unit with the hydraulic lifting lever.

3

Move the throttle control to the MIN. position. Turn the 
ignition key to ”OFF”-position.

2

1