Husqvarna ZTH6125 用户手册

English-

37

assembly is supplied with an “O” ring (47) . 
The “O” ring must be removed before the 
pulley is fitted.

The fitting procedure is the reverse of the 
removal procedure.

Tightening torques:

•

Blade bolts 122 Nm (90 lb/ft).

•

Pulley bolts 61 Nm (45 lb/ft).

 

•

Remove the blades. 

•

Check that the blades do not have cracks 
or any other damage. If they do, scrap 
them.

•

Clamp in a screw vice (see diagram) and 
file until sharp. 

Balancing is as follows: 

•

Fix a mandrel (for example) horizontally 
in a screw vice (see diagram).

•

Push a blade onto the mandrel and 
check that it is evenly balanced. The 
diagram shows a blade which needs 
adjusting. This blade should be ground at 
the edge indicated by the straight arrow. 

•

The fitting procerdure is the reverse of 
the removal procedure. 

The tightening torque for the blade bolts 
is 122 Nm (90 lb/ft).

6012-088

6012-089