Husqvarna PZ6029D 用户手册
52
lUbRICaTION
52
12/12 Every year
1/52 Every Week
1/365 Every day
1/52 Every Week
1/365 Every day
Lubricate with grease gun
oil change
Filter change
oil change
Filter change
Level check
8065-074
Lubrication Schedule
General
Remove the ignition key to prevent unintentional
movements during lubrication.
When lubricating with an oil can, it must be filled with
engine oil.
When lubricating with grease, unless otherwise stated,
use high grade molybdenum disulphide grease.
For daily use, the machine should be lubricated twice
weekly.
Remove the ignition key to prevent unintentional
movements during lubrication.
When lubricating with an oil can, it must be filled with
engine oil.
When lubricating with grease, unless otherwise stated,
use high grade molybdenum disulphide grease.
For daily use, the machine should be lubricated twice
weekly.
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts
or the drive surfaces on the belt pulleys. Should this
happen, attempt to clean them with spirits. If the belt
continues to slip after cleaning, it must be replaced.
Diesel fuel or other petroleum products must not be
used to clean belts.
It is important to avoid getting lubricant on the belts
or the drive surfaces on the belt pulleys. Should this
happen, attempt to clean them with spirits. If the belt
continues to slip after cleaning, it must be replaced.
Diesel fuel or other petroleum products must not be
used to clean belts.
Engine and Radiator
Follow the engine manufacturer’s lubrication
instructions. Refer to engine manufacturer’s owners
Manual for information.
instructions. Refer to engine manufacturer’s owners
Manual for information.