Husqvarna PZ29D BF 用户手册
1
2
MaINTeNaNCe
44
Pump Neutral Adjustment
WARNING!
Neutral adjustments are made with
the rear tires able to rotate. Do not
wear loose clothing or jewelry and
keep hands and feet away from tires.
Neutral adjustments are made with
the rear tires able to rotate. Do not
wear loose clothing or jewelry and
keep hands and feet away from tires.
Neutral adjustments are made with the rear wheels off
the ground and able to rotate, which is done with the
engine running.
the ground and able to rotate, which is done with the
engine running.
Using a jack stand, raise the rear of the mower
1.
up off the ground enough so the tires can
rotate freely. Make sure the machine is securely
supported.
Lift the seat and rotate fully forward until
rotate freely. Make sure the machine is securely
supported.
Lift the seat and rotate fully forward until
2.
supported by the seat rod.
Unplug the safety switch and harness from the
Unplug the safety switch and harness from the
3.
seat.
Using two
Using two
4.
9
/
16
" wrenches, loosen the jam nut next
to the turnbuckle. (See illustration.)
Hold down the safety switch plunger and start the
Hold down the safety switch plunger and start the
5.
engine. Continue to hold the plunger down during
the next two steps.
Keeping the drive levers in the neutral lock
the next two steps.
Keeping the drive levers in the neutral lock
6.
position, release the parking brake. The drive
wheels should NoT rotate.
If the drive wheels rotate, turn the turnbuckle
wheels should NoT rotate.
If the drive wheels rotate, turn the turnbuckle
7.
until the wheels stop. Release plunger to stop the
engine.
Retighten the jam nut against the turnbuckle.
engine.
Retighten the jam nut against the turnbuckle.
8.
Duplicate procedure for the opposite wheel.
9.
After adjustments are made, secure safety switch
10.
and lower the seat.
8065-049
1. Jam Nut
2. Turnbuckle
Neutral adjustment
2. Turnbuckle
Neutral adjustment
8065-050
Seat safety switch