Husqvarna 953878322 用户手册

ENGLISH -

Training

a)Anyone who is not aware of the instructions for use

shall not use the lawn mower. Do not allow children

or anyone who has not understood these instructions

to use the lawn mower. A minimum age for using the

machine can be fixed by local regulations.

b)The operator is responsible for the safety of other

people in the working area. Keep children and

domestic animals at a safe distance when the lawn

mower is in use.

c)This machine is to be used exclusively for cutting

natural grass. Never use the mower for other pur-

poses (e.g., for flattening out bumps in the ground,

such as mole-hills or ant- hills).

d)Work only when there is sufficient light.

e)Before mowing, remove all foreign objects from the

lawn which may be thrown by the machine. While

mowing, stay alert for any foreign objects which may

have bean missed.

Setting up and operating the lawn mower

a)When mowing, wear strong footwear (boots or heavy

shoes) and long trousers.

b)Before you start mowing, make sure that the Blade

and blade fixing screw are securely fastened. If the

blade is damaged, it must be replaced.

c)Turn off the engine, wait until the blade has stopped

before:

removing safety protection devices;

transporting, lifting or moving the machine away

from the working area;

carrying out maintenance or cleaning, or when

carrying out any operation on the blade;

adjusting the cutting height;

leaving the machine unattended.

Caution! The blade starts turning as soon as the

engine is started

d)Do not use the lawn mower when it is raining or

when the grass is wet

e)The safety distance, which is set by the length of

the handle, must always be kept. Furthermore, when

mowing, never run; you must always walk.

f)Exercise extreme caution when turning or when

pulling the lawn mower towards you.

g)Particular precautions must be taken when mowing

on slopes or downhill stretches:

Use appropriate antislip footwear.

Always be sure of your footing.

Mow across the face of slopes, never up or down.

Take great care when changing direction.

Do not mow excessively steep slopes.

h)Never use the lawn mower unless the guards and

safety devices (e.g. deflector, grass catcher) are

securely in position and in good condition.

i)Ensure that the grass catcher and deflector are

correctly located before using the mower.

j)While mowing, always drag the power supply cable

behind the lawn mower and on the side where the

grass has already been cut.

k)Always move around on the lawn in the part that has

already been mown.

l)For reasons of safety, the engine must never exceed

the speed. (r.p.m.) indicated on the label.

m) Take care when starting the engine and be sure to

follow the user instructions. Never place your hands

or feet underneath the deck or into the rear discharge

chute while the engine is running.

n) Never lift the rear of the mower while starting the

engine or during normal operation.

o) If the blade happens to hit any obstacle, stop the

mower at once. Then get an expert to examine the

blade.

Maintenance and storage

a)Make sure that all nuts, bolts, and screws are kept

well tightened to keep the mower in a safe operating

condition.

b)At regular intervals, check the cables. All the cables

must always be in perfect order. Under no circum-

stances repair a damaged cable with insulating tape

or clamps, but replace it with a new one.

c)Take the utmost care not to run the lawn mower

over the power supply cable. Were this to happen,

first disconnect the power supply cable from the

mains, then unplug the cable from the lawn mower

and check it thoroughly to make sure that it is not

damaged.

d)As a power supply cable, use exclusively standardi-

zed PVC- coated cables, type H 05 VV-F.

g)Frequently check the grass catcher for wear or

deterioration

h)For safety reasons, be sure to replace worn-out or

damaged parts in due time.

i)Assemble the blade following the corresponding

instructions and use only blades bearing the maker’s

name or the trademark of the manufacturer or sup-

plier and marked with the reference number.

l)To protect hands during disassembly or assembly of

the blades, it is absolutely essential to wear suitable

protective gloves.

SAFETY RULES