Husqvarna PZ7234FX / 966061401 用户手册

CONTROls

21

If the mower is not tracking straight, check the 
air pressure in both rear tires. Recommended air 
pressure for the rear tires is 15 psi (1 bar). 

Tracking adjustments are made using the tracking 

1. 

bolt and tracking knob. The tracking bolt and 
tracking knob act as limiting devices for the 
motion control levers when in the full-forward 
position.
For preliminary tracking adjustment, move unit 

2. 

to an open, unobstructed area such as an empty 
parking lot or open field.
Back the tracking bolt out until flush with nut.

3. 

Loosen tracking knob out until flush with nut.

4. 

Test operate unit by driving it at full throttle and 

5. 

the full forward position on both motion control 
levers. Gradually turn in the tracking bolt on the 
right hand side until the unit noticeably starts 
drifting right.
Drive forward at full throttle with both motion 

6. 

control levers in the full forward position. 
Gradually turn in the tracking knob (left side) until 
unit tracks straight.

The hour meter displays the total operating time.
It will flash CHG oIL (Change oil) at 50 hour intervals. 
The flash duration is one hour before and one hour 
after the interval. The CHG oIL icon will come on 
and shut off automatically. The hour meter cannot 
be manually reset. Depending on fuel type, control 
console may vary.

8065-004

8065-060