Husqvarna 65022ES 用户手册

Your lawn mower was shipped ready to be used as a 
mulcher.  To convert to bagging or discharging:

REAR BAGGING  (See Fig. 6)
•         Open rear door and remove mulcher plug.  Store mulcher 

plug in a safe place.

•      You can now install the grass catcher or optional clip-

ping defl ector.

•         To convert to mulching or discharging operation, install 

mulcher plug into rear discharge opening of mower.

The engine speed was set at the factory for optimum per-
formance.  Speed is not adjustable.

•      Your lawn mower is equipped with an operator pres-

ence control bar which requires the operator to be po-
sitioned behind the mower handle to start and operate 
the mower.

•      To  start  forward  motion,  lift  drive  control  bar  up  to 

handle.

•      To stop forward motion, release drive control bar.

IMPORTANT:  ALWAYS KEEP DRIVE CONTROL FULLY 
ENGAGED AGAINST HANDLE WHEN IN USE.

The operation of any lawn mower can result in foreign objects thrown into the eyes, which can result in 
severe eye damage.  Always wear safety glasses or eye shields while operating your lawn mower or per-
forming any adjustments or repairs.  We recommend standard safety glasses or a wide vision safety mask 
over spectacles.

Raise wheels for low cut and lower wheels for high cut, 
adjust cutting height to suit your requirements. Me di um 
position is best for most lawns.

•         To change cutting height, squeeze adjuster lever to ward 

wheel. Move wheel up or down to suit your re quire ments. 
Be sure all wheels are in the same setting.

NOTE: Adjuster is properly positioned when plate tab inserts 
into hole in lever. Also, 9-position adjusters (if so equipped) 
allow lever to be positioned between the plate tabs.