Husqvarna 96045000411 用户手册

(2) Keys

(1) Oil Drain Tube 

Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes.

•  Sit in seat.
• 

Lift up adjustment lever (A) and slide seat until a com-

fortable position is reached which allows you to press 

clutch/brake pedal all the way down.

•  Release lever to lock seat in position.

•  Lift seat to raised position.
NOTE: If this battery is put into service after month and 

year indicated on label (label is located between terminals) 

charge battery for minimum of one hour at 6-10 amps. 

(See "BATTERY" in Maintenance  section of this manual 

for charging instructions).
•  For battery and battery cable installation see "RE-

PLACING BATTERY" in the "Service and Adjustments" 

section in this manual.

When right or left hand is mentioned in this man ual, it means 

when you are in the operating po si tion (seated be hind the 

steer ing wheel).

•  Remove all accessible loose parts and parts cartons 

from carton.

•  Cut along dashed lines on all four panels of carton. 

Remove end panels and lay side panels flat.

•  Check for any additional loose parts or cartons and 

remove.

NOTE: You may now roll your tractor off the skid. Follow the 

instructions below to remove the tractor from the skid.

  WARNING: Before start ing, read, un der stand and fol low 

all in struc tions in the Op er a tion section of this man u al. Be 

sure tractor is in a well-ventilated area. Be sure the area in 

front of tractor is clear of other peo ple and objects.

•  Raise attachment lift lever to its highest po si tion.
•  Release parking brake by de press ing brake ped al.
•  Place freewheel control in dis en gaged po si tion to dis-

 en gage trans mis sion (See “TO TRANS PORT” in the 

Op er a tion section of this manual).

•  Roll tractor forward off skid.
Continue with the instructions that follow.