Husqvarna LZF6127 用户手册

SAFETY

English

-15

•

Ensure that nuts and bolts, especially the 

fastening bolts for the blade attachments, 

are properly tightened, torqued and that the 

equipment is in good condition.

•

Do not modify safety equipment. Check 

regularly to be sure it works properly. The 

machine must not be driven with defective 

or unmounted protective plates, protective 

cowlings, safety switches, or other protective 

devices.

•

Do not change the settings of governors and 

avoid running the engine with overly high 

engine speeds. If you run the engine too fast, 

you risk damaging the machine components.

•

Sparking can occur when working with the 

battery and the heavy cables of the starter 

circuit. This can cause battery explosion, fire or 

eye injury. Sparking in this circuit can not occur 

after the chassis cable (normally negative, 

black) is removed from the battery.

•

Use protective goggles.

•

Ensure that the fuel filler cap is mounted tightly 

and no flammable substances is stored in an 

open vessel.

•

Never work with the starter circuit if there is 

spilled fuel.

•

Disconnect the chassis cable from the battery 

first and reconnect it last.

•

Do not make a bridge short circuit across the 

starter relay to run the starter.

•  Never use the machine indoors or in spaces 

lacking proper ventilation. The exhaust fumes 

contain carbon monoxide, an odorless, 

poisonous, and lethal gas.

•

Stop and inspect the equipment if you run over 

or into anything. If necessary, make repairs 

before starting.

•

Never make adjustments with the engine 

running.

•

The machine is tested and approved only 

with the equipment originally provided or 

recommended by the manufacturer. Only use 

approved repair parts for the machine.

6003-009

8009-728