Husqvarna Rider 318 用户手册

下载
页码 32
English
 – 13
PRESENTATION
Seat
The seat has a jointed attachment on the front edge and can 
be tipped forward.
The seat can also be adjusted lengthways.
Loosen the handles under the seat and adjust it forwards or 
backwards to the desired position.
Fueling
The engine runs on unleaded petrol with a minimum octane 
rating of 85 (not mixed with oil). We recommend the use of 
biodegradable alkylate petrol. (max. methanol 5%, max. 
ethanol 10%, max. MTBE 15%)
Do not fill the tank completely, leave an expansion area of at 
least 2.5 cm (1“).
Release lever
The release control must be pulled out in order for the 
machine to be moved when the engine is shutoff.
Should you attempt to drive the machine with the clutch 
controls pulled out it will not move. The drive on the axle is 
disengaged when one of the controls is pulled out.
Pull the controls to the end positions, do not use an 
intermediate position.
Release lever Rider 318
Pull out the control to disengage the drive system.
Push in the control to engage to the drive system.
Release lever Rider 320 AWD
Rider 320 AWD has one control for the front axle and one 
control for the rear axle.
Clutch control, rear axle
   - Control drawn out, drive system disengaged.
   - Control depressed, drive system engaged.
Clutch control, front axle
The control is positioned on the inside of the left front 
wheel.
   - Rear control (pulled out), drive system disengaged.
   - Front control (pushed in), drive system engaged.
!
WARNING! Petrol is highly inflammable. 
Exercise care and refuel outdoors (see 
safety instructions).
IMPORTANT INFORMATION Do not use the fuel tank as a 
support area.
IMPORTANT! Always drive the machine with both clutch 
controls pressed in.