Husqvarna MZ61 用户手册

25

OPERATION

8058-268

1.  Read the sections on Safety and Controls before 

starting the machine.

2.  Perform the daily maintenance before starting 

(see Maintenance Schedule in the Maintenance 

section).

3.  Check that there is sufficient fuel in the fuel tank.
4.  Adjust the seat to the desired position.

5.  Set the deck cutting height by inserting the lift pin 

into the desired cut height.

The following conditions must be fulfilled before the 
engine can be started:
•  The blade switch must be pressed downward into 

the disengaged position.

•  The parking brake must be up into the activated 

position.

•  Both steering controls must be in the locked 

(outer) neutral position.

8011-441