Husqvarna Rider 320 AWD 用户手册
12 –
English
PRESENTATION
Presentation
Congratulations on your choice of an excellent quality product
that will give you great pleasure for many years. This
operator’s manual describes Rider 318 and Rider 320 AWD.
that will give you great pleasure for many years. This
operator’s manual describes Rider 318 and Rider 320 AWD.
Rider 320 AWD is equipped with all wheel drive.
The power transmission from the engine is handled by a
hydrostatic transmission, which allows variable variation of
the speed by using the pedals.
hydrostatic transmission, which allows variable variation of
the speed by using the pedals.
One pedal for driving forward and one for reverse.
Throttle control/choke control
The throttle control regulates the engine speed, and thereby
also the rotation speed of the blades.
also the rotation speed of the blades.
The control is also used to activate the choke. When the
choke is engaged a richer fuel and air mixture is fed to the
engine, which facilitates starting in the cold.
choke is engaged a richer fuel and air mixture is fed to the
engine, which facilitates starting in the cold.
Speed limiter
The speed of the machine is steplessly regulated with two
pedals. Pedal (1) is used to drive forwards, and pedal (2) to
drive backwards.
pedals. Pedal (1) is used to drive forwards, and pedal (2) to
drive backwards.
Parking brake
The parking brake is applied as follows:
1
Press down the parking brake pedal (1).
2
Press in the lock button (2) on the steering column.
3
Release the parking brake pedal while keeping the button
pressed in.
pressed in.
The parking brake lock disengages automatically when the
brake pedal is pressed.
brake pedal is pressed.
Cutting unit
Rider 318 and Rider 320 AWD can be equipped with three
different cutting units.
different cutting units.
•
Combi 94
•
Combi 103
•
Combi 112
The Combi-unit, equipped with a BioClip-plug, finely chops
the cuttings to fertiliser. Without the BioClip-plug the unit
works in the same way as a rear ejection unit.
the cuttings to fertiliser. Without the BioClip-plug the unit
works in the same way as a rear ejection unit.
Lifting lever for the cutting unit
The lift lever is used to set the cutting unit in transport or
mowing position.
mowing position.
If the lever is pulled backwards the unit is raised and the
blades automatically stop rotating (transport position).
blades automatically stop rotating (transport position).
If the lock button is pressed in and the lever is moved forwards
the unit will be lowered and the blades will automatically start
to rotate (mowing position).
the unit will be lowered and the blades will automatically start
to rotate (mowing position).
The lever can also be used to temporarily regulate the cutting
height, e.g. for a small mound in the lawn.
height, e.g. for a small mound in the lawn.
Cutting height adjustment lever
The cutting height can be adjusted to 10 different positions
with the cutting height lever.
with the cutting height lever.
Combi-unit 40-90 mm (1 9/16” - 3 9/16”)
!
WARNING! Make sure that branches do not
obstruct the pedals when mowing under
bushes. Otherwise there is a risk you may
lose control.
obstruct the pedals when mowing under
bushes. Otherwise there is a risk you may
lose control.
1
2
1
2