Husqvarna Rider 320 AWD 用户手册

24 – 

English

The cutting head can be placed in the service position to 
provide easy access for cleaning, repairs and servicing. In the 
service position the cutting unit is raised and locked in the 
vertical position.

1

Position the machine on flat ground.

2

Apply the parking brake.

3

Set the cutting height control in the lowest position and lift 
up the cutting unit.

4

Release the clip on the front hood and lift off the fender.

5

Disengage the spring for the drive belt tensioning wheel.

6

Loosen on the cutting height stay and place in the holder.

7

Remove the drive belt and place it in the belt holder.

8

Grip the front edge of the unit and pull forwards until it 
stops.

9

Lift the unit until it stops and a clicking sound is heard. The 
unit locks automatically in the vertical position.

1

Grip the front edge of the unit and loosen the lock, fold 
down and slide in the unit.

2

Replace the cutting height stay and the belt.

3

Tension the belt with the belt adjuster.

4

Fit the front cover.