Husqvarna Robotic Lawn Mowe 用户手册

Automower from 

23

™

The Automower is supplied with an uncharged battery. 
As soon as the charging station is connected, it is 
possible to charge the mower.

1.

Set the main switch to the OFF position.

2.

Place the Automower in the charging station to 
charge the battery while you are laying the 
boundary wire.

From an uncharged state the battery takes about 
1 1/2 to 2 1/2 hours until it is fully charged.

The boundary wire can be installed in one of the 
following ways:

•

Securing the wire to the ground with staples.

It is preferable to staple down the boundary cable, 
if you want to make adjustments to the boundary 
wire during the first few weeks of operation.

•

Bury the wire. 

It is preferable to bury the boundary wire if you 
want to dethatch or aerate the lawn. 

If necessary both methods can be combined so one 
part of the boundary wire is stapled down and the 
remainder is buried.

The boundary wire should be laid so it:

•

Forms a loop around the working area for 
Automower. Only an original boundary wire must 
be used. This is tinned and has a high quality 
insulation to withstand the dampness in the 
ground.

•

Is a maximum of 500 metres long.

•

Maintains a maximum distance of 3 metres from 
Automower in the entire working area.

3012-385