Husqvarna 965167501 用户手册

下载
页码 44
STARTING AND STOPPING
22 – English
115 10 82-26 Rev.2 2008-06-03
Never start a chain saw unless the bar, chain and all 
covers are fitted correctly. See instructions under the 
heading Assembly. Without a bar and chain attached 
to the chain saw the clutch can come loose and cause 
serious injury.
The chain brake should be activated when starting. 
Se instructions under the heading Start and stop. Do 
not drop start. This method is very dangerous 
because you may lose control of the saw.
Never start the machine indoors. Exhaust fumes can 
be dangerous if inhaled.
Observe your surroundings and make sure that there 
is no risk of people or animals coming into contact 
with the cutting equipment.
Always hold the saw with both hands. The right hand 
should be on the rear handle, and the left hand on the 
front handle. All people, whether right or left handed, 
should use this grip. Use a firm grip with thumbs and 
fingers encircling the chain saw handles.
The chain brake is released by moving the front hand 
guard marked ”PULL BACK TO RESET” back, 
towards the front handle. 
Stopping
Stop the engine by pushing the start/stop switch down.
CAUTION! The start/stop switch automatically returns to 
run position. To avoid involuntary start up, the spark plug 
cap must always be removed from the spark plug when 
the machine is unsupervised.