Husqvarna HU775H / 961450007 用户手册

The handle on your lawn mower has three (3) height posi-

tions - adjust to height that suits you.
1.  Remove knob and carriage bolt on one side of the 

lower handle (Figure 28).

2.  While holding handle assembly, remove knob and 

car riage bolt from opposite side, align hole in handle 

with desired hole in handle bracket and reassemble 

bolt and knob and tighten securely.

3.  Align opposite side of handle with same positioning 

hole and secure with bolt and knob.

Your engine speed has been factory set.  Do not attempt to 

increase engine speed or it may  result in personal injury.  If 

you believe that the engine is running too fast or too slow, 

take your lawn mower to an authorized service center for 

repair and adjustment.

Your carburetor is not adjustable.  If your engine does not 

operate properly due to suspected carburetor problems, 

take your lawn mower to an authorized service center for 

repair and/or adjustment.

IMPORTANT: NEVER TAMPER WITH THE ENGINE GOVER-

NOR, WHICH IS FACTORY SET FOR PROPER ENGINE SPEED.  

OVER SPEED ING THE ENGINE ABOVE THE FACTORY HIGH 

SPEED SETTING CAN BE DANGEROUS.  IF YOU THINK THE 

ENGINE-GOVERNED HIGH SPEED NEEDS ADJUSTING, 

CONTACT YOUR NEAREST AUTHORIZED SER VICE CEN TER, 

WHICH HAS PROPER EQUIP MENT AND EXPERIENCE TO 

MAKE ANY NEC ES SARY ADJUSTMENTS. 

High

Medium

Low

1. Knob
2. Bolt
3. Handle bracket

Figure 28