Husqvarna IZ 21 用户手册
English-
50
MAINTENANCE
To adjust anti-scalp rollers
Anti-scalp rollers are properly adjusted when
they are just slightly off of the ground when
the deck is at the desired cutting height in the
operating position. Anti-scalp rollers then
keep the deck in the proper position to help
prevent scalping in most terrain conditions.
they are just slightly off of the ground when
the deck is at the desired cutting height in the
operating position. Anti-scalp rollers then
keep the deck in the proper position to help
prevent scalping in most terrain conditions.
Tunnel Deck -
The anti-scalp rollers can be set in three
positions.
positions.
¥
Upper position 1.5 to 3 (38 to 76 mm)
grass.
¥
Middle position 3 to 4.5 (76 to 114 mm)
grass.
¥
Lower position 4.5 to 6 (114 to 152 mm)
grass.
Combi Deck -
The anti-scalp rollers can be set in two
postions.
postions.
¥
Upper position 1.5 to 3 (38 to 76mm)
grass.
¥
Lower position 3 to 5 (38 to 127mm)
grass.
The rollers should be approximately 1/4
(6.5 mm) from ground.
(6.5 mm) from ground.
CZ-9
Anti-scalp roller - Tunnel Decks
IMPORTANT INFORMATION
Adjust Anti-scalp rollers with the
mower on a flat level surface.
mower on a flat level surface.
CZ-9
Anti-scalp roller - Combi Decks
IMPORTANT INFORMATION
The anti-scalp rollers must not be used for
gauge wheels or the roller and deck may
be damaged.
gauge wheels or the roller and deck may
be damaged.