Husqvarna 968999692 用户手册

English

-

47

Deck belt installation
NOTE: For ease in installing the deck belt, refer to the 

routing decal on the front edge of the deck.

•

Wrap the deck belt around the electric clutch that 

is located on the engine shaft.

•

Push the rest of the belt through the IZT(Integrated 

Zeroturn Transaxle) support and up onto the deck.

•

Starting on the right hand side of the deck, wrap 

the belt around the large right side idler, right cutter 

housing pulley, small center idler, center pulley, left 

side pulley and then around the large left side idler.

•

The belt will be loose at this point.

•

Using a ratchet with a 9/16” socket on the spring 

idler bolt to relieve the tension on the belt. 

See decal on the top of deck for belt routing 

information.

•

After installation is complete check the belt for 

twists.

8058-007

1. Clutch pulley
2. Deck belt
3. Spring idler pulley
4. Fixed idler pulley

1

2

4

4

3

8011-622