Husqvarna 15T 用户手册

English

 – 29

1

Grip the front edge of the unit and loosen the lock, fold 
down and slide in the unit.

2

Replace the cutting height stay and the belt.

3

Tension the belt with the belt adjuster.

4

Fit the front cover.

To achieve the best mowing results it is important that the 
blades are undamaged and well-sharpened.

Check that the blades’ attachment screws are tight.

The blades should be balanced after sharpening.

Damaged blades should be replaced when hitting obstacles 
that result in a breakdown. Let the servicing dealer judge 
whether the blade can be repaired/ground or must be 
discarded.

To change a Combi unit from BioClip function to cutting unit 
with rear ejection, remove the BioClip plug located under the 
unit with three screws.

1

Put the unit in the service position, see Placing in the 
service position.

2

Remove the three screws holding the BioClip plug, and 
remove the plug.

3

Tip: Fit three full-thread screws M8x15 mm in the screw 
holes to protect the threads.

4

Replace the unit in normal position.

Fit the BioClip plug in the reverse order.

1

Put the unit in the service position, see Service position 
for the cutting unit.

2

Loosen the knob holding the BioClip-plug and remove the 
plug.

3

Replace the unit in normal position.

IMPORTANT INFORMATION Replacing or sharpening the 
blades should be conducted by an authorised service 
workshop.