Husqvarna 16 AWD 用户手册

 

English

 

 – 

 

5

 

1

 

Top up battery with acid and charge for four hours.

2

Fit steering wheel, seat and any optional equipment.

3

Adjust cutting unit:

Adjust lift springs (effective weight of cutting unit should be 12-15kg / 26.5-33 lb).

Adjust cutting unit so that rear edge is about 2-4 mm / 1/8” higher than front edge.

Adjust cutting unit height setting so that cutting height limit is 5 mm / 3/16” above the frame of the unit at the lowest 
cutting height.

4

Check that the right amount of oil is in the engine.

5

Check that the right amount of oil is in the transmission. (Not Rider 11).

6

Check and adjust tyre pressure (60 Kpa, 0.6 bar).

7

Connect battery.

8

Fill with fuel and start engine.

9

Check that machine does not move in neutral.

10 Check:

Forward drive.

Reverse drive.

Operation of blades.

Seat safety switch.

Lif lever safety switch.

Safety switch for the hydrostat pedals/neutral position.

Check that engine revs max. 2950 rpm.

11 Tell customer about:

Needs and benefits of following the service schedule.

Servicing and the influence of this journal on the second-hand value of the machine.

Range of applications for BioClip.

Complete proof of sale etc.

Pre-delivery service carried out. No outstanding problems. Certified:

Date, mileage, stamp, signature

 

1

 

Change engine oil