Husqvarna 16 C 用户手册

24 – 

English

4

Lift out the air filter cartridge from the fan housing.

5

Replace the air filter cartridge, if clogged with dirt.

6

Carefully lift the precleaner out of the fan housing.

7

 Carefully clean the fan housing so that dirt does not fall 
down into the carburettor.

8

Insert a new precleaner and air filter cartridge in the fan 
housing.

9

Align the tabs on the cover with the slits in the housing and 
replace the air filter cover.

10 Pull the handle outwards. Secure the handle in the air filter 

cover and close the cover by pressing it inwards.

Replace the fuel filter every 100 running hours (once per 
season) or more frequently if it is clogged.

Replace the filter as follows:

1

Open the engine cover.

2

Move the hose clips away from the filter. Use a pair of flat 
pliers.

3

Pull off the filter from the hose ends.

4

Press the new filter into the ends of the hoses. If 
necessary apply liquid detergent to the ends of the filter to 
facilitate connection.

5

Push the hose clips back on the filter and tighten.

Check regularly that the fuel pump’s air filter is free from dirt.

The filter can when necessary be cleaned with a brush.

The tyre pressure should be 60 kPa / 0.6 bar / 9 PSI on all 
wheels. In order to improve drive power, the pressure in the 
rear tyres can be reduced to 40 kPa / 0.4 bar / 6 PSI.

Do not use compressed air to clean the paper filter.

Do not oil the paper filter. They must be fitted dry.

IMPORTANT INFORMATION Different tyre pressures on 
the front tyres will result in the blades cutting the grass at 
different heights.