Husqvarna 15T AWD 用户手册

English

 – 25

Open the engine cover.

Check that the cooling intake is free from leaves, grass and 
dirt.

Check the air duct, located on the inside of the engine cover, 
ensure it is clean and does not rub against the cooling air 
intake.

A blocked cooling intake will interfere with the cooling of the 
engine, which can damage the engine.

1

Place the Rider on a flat surface and apply the parking 
brake.

2

Check that the lever for setting the cutting height is in the 
lowest position and that the lifting lever for the cutting unit 
is in mowing position.

3

Push the equipment frame down and place the catch 
against the frame.

4

Engage the belt in the belt holder.

5

Push the deck in and put the front guide plugs in the 
grooves on the equipment frame, one on each side.

6

Lift up the cutting unit

7

Push the unit in so that the interior plugs touch the bottom 
of the equipment frame’s grooves.

8

Fit the drive belt around the drive wheels of the cutting 
unit. Make sure the belt is placed on the correct side of the 
belt tensioner wheel.