Husqvarna 11C 用户手册

16 – 

English

•

Read the safety instructions and information concerning 
the placement of controls and functions before starting.

•

Perform daily maintenance before starting as set out in 
the Maintenance schedule.

Adjust the seat to the required position.

1

Make sure that the clutch control is depressed. (Run 
position) Rider 16 AWD has one control for the front axle 
and one control for the rear axle.

2

Lift up the cutting unit by pulling the lever backwards to its 
locked position.

3

Activate the parking brake. This is done as follows:

   - Press down the parking brake pedal (1).

   - Press in the lock button (2) on the steering column.

   - Release the brake pedal while holding the button pressed.

The parking brake lock disengages automatically when the 
brake pedal is pressed.

Rider 11R and Rider 11 C have the brake pedal and release 
button on the right-hand side.

Rider 16 AWD The engine can not be started if the parking 
brake is not pressed down.

4

Rider 11R and Rider 11 C

Put the gear shift lever in the ”N” position (neutral).

With a cold engine:

5

Move the throttle to position 3 (choke position). In this 
position the engine is fed with a richer mixture, which 
means the engine is easier to start.

IMPORTANT!

The air intake grille in the engine cover behind the driver’s 
seat must not be blocked by, for example, clothing, leaves, 
grass or dirt.

Impaired cooling of the engine. Risk of major engine 
damage.

Do not press down the reversing block button on the lever 
when neutral position is engaged. Otherwise this will 
activate the start lock function.

1

2