Husqvarna 15V2s AWD 用户手册

 

English

 

 – 15

 

The seat can also be adjusted lengthways.

To adjust move the lever under the front edge of the seat to 
the left, so that the seat can be moved forward or backwards 
to the required position.

 

The engine runs on unleaded petrol with a minimum octane 
rating of 87 (not mixed with oil). We recommend the use of 
biodegradable alkylate petrol. (max. methanol 5%, max. 
ethanol 10%, max. MTBE 15%)

Do not fill the tank completely, leave an expansion area of at 
least 2.5 cm (1“).

 

The release control must be pulled out in order for the 
machine to be moved when the engine is shutoff.

Should you attempt to drive the machine with the clutch 
controls pulled out it will not move. The drive on the axle is 
disengaged when one of the controls is pulled out.

Pull the controls to the end positions, do not use an 
intermediate position.

 

Rider 15V2 AWD has one control for the front axle and one 
control for the rear axle.

•

Clutch control, rear axle

   - Control drawn out, drive system disengaged.

   - Control depressed, drive system engaged.

•

Clutch control, front axle

The control is positioned on the inside of the left front 
wheel.

   - Rear control (pulled out), drive system disengaged.

   - Front control (pushed in), drive system engaged.

 

•

Pull out the control to disengage the drive system.

Push in the control to engage to the drive system.

 

IMPORTANT!

Do not use the fuel tank as a support area.

 

IMPORTANT!

Always drive the machine with both clutch controls pressed 
in.